Ibm 6648 Manual de usuario descargar pdf (Pagina 122)

If the printer self-test does not run correctly, the problem is in the printer.

Refer to the printer service manual.

If the printer self-test runs correctly, install a wrap plug in the parallel port

and run the diagnostic tests to determine which FRU failed.

If the diagnostic tests (with the wrap plug installed) do not detect a failure,

replace the printer cable. If that does not correct the problem, replace the

system board or adapter connected to the printer cable.

Power supply

If the power-on indicator is not on, the power supply fan is not running, or

the computer will not power-off, use the following procedures.

Check/Verify FRU/Action

Verify that the voltage-selector switch is set for the

correct voltage.

Correct the voltage-selector switch setting

Check the following for proper installation.

v Power Cord

v On/Off Switch connector

v On/Off Switch Power Supply connector

v System Board Power Supply connectors

v Microprocessor(s) connection

Reseat

Check the power-on switch for continuity. Power Cord

Check the power-on switch for continuity. Power-on Switch

If the above are correct, check the following voltages.

108 Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648,

6649

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 247 248

Sin comentarios

Ibm 6648 Manual de usuario Pagina 122