IBM Intel Xeon E5506 Especificaciones Pagina 22

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 98
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 21
Independent Loading Mechanism (ILM)
22 Thermal/Mechanical Design Guide
3.1.2 ILM Back Plate Design Overview
The unified back plate for 2-socket server and 2-socket Workstation products consists
of a flat steel back plate with threaded studs for ILM attach, and internally threaded
nuts for heatsink attach. The threaded studs have a smooth surface feature that
provides alignment for the back plate to the motherboard for proper assembly of the
ILM around the socket. A clearance hole is located at the center of the plate to allow
access to test points and backside capacitors. An additional cut-out on two sides
provides clearance for backside voltage regulator components. An insulator is pre-
applied.
Back plates for processors in 1-socket Workstation platforms are covered in the
Intel® Xeon® Processor 3500 Series Thermal/Mechanical Design Guide.
Figure 3-1. ILM Cover Assembly
Load Plate
Load Lever
Frame
Captive Fastener (4x)
Load Plate
Load Lever
Frame
Captive Fastener (4x)
Vista de pagina 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 97 98

Comentarios a estos manuales

Sin comentarios