Ibm THINKCENTRE 8123 Manual de usuario descargar pdf (Pagina 31)

Important

To avoid damaging the microprocessor contacts, do not tilt the

microprocessor when installing it into the socket.

9. Using the vacuum pen 1, lower the microprocessor straight down into the

microprocessor socket.

Note: Install the black protective cover that was removed from the new

microprocessor onto the defective microprocessor after the installation is

complete.

10. Pivot the microprocessor retainer3 to the closed position and pivot the

locking lever 2 to secure the microprocessor 1. Make sure the locking

lever is engaged with the retainer tab when securing the microprocessor.

Chapter 2. Replacing hardware 23

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 43 44

Sin comentarios

Ibm THINKCENTRE 8123 Manual de usuario Pagina 31