IBM Personal Computer 9308 Manual de usuario Pagina 25

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 244
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 24
Removing rear filler panels: Use the following procedure to remove the rear filler
panels from the rack cabinet:
1. Grasp the rear filler panel firmly and slide it slowly toward the front of the rack
cabinet.
2. Lift the filler panel and remove it from the rack cabinet.
3. Repeat this procedure to remove both filler panels.
Reverse this procedure to install the rear side panels on the rack cabinet.
Installing rear filler panels: Use the following procedure to install the rear filler
panels on the rack cabinet:
1. Align the bottom of the rear filler panel with the tab on the bottom rear of the
rack cabinet.
Rear filler panel
Figure 11. Removing the NetBAY42 rear filler panels
Type 9306 Model 250/420/421 15
Vista de pagina 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 243 244

Comentarios a estos manuales

Sin comentarios