IBM RS/6000 Manual de usuario descargar pdf (Pagina 206)

2. Select the pdisk that you want to certify. The following instructions are dis-

played:

┌──────────────────────────────────────────────────────────────────────────────────┐

│ SSA SERVICE AIDS 8238 │

│ CERTIFY DISK 8244 │

│ CERTIFY DISK 8245 │

│ │

│ pdisk1 22222222 -4-P 9.1 GB SSA F Physical Disk Drive │

│ │

│ Move cursor onto selection, then press Enter. │

│ │

│ Set or Reset Identify. │

│ Select this option to set or reset the Identify indicator │

│ on the disk drive. │

│ Certify. │

│ Select this option to start the Certify operation. │

│ │

│ F3=Cancel F1=Exit │

│ │

└──────────────────────────────────────────────────────────────────────────────────┘

3. If you are not sure of the identification (pdisk number) of the disk drive module

that you want to format, use the identify function to get a positive physical iden-

tification of the module (see “The Identify Function” on page 7-31). You can

further ensure that you have selected the correct disk drive module by verifying

that the serial number on the front of the disk drive module is the same as the

serial number that is displayed on the screen.

4. When you are sure that you have selected the correct disk drive module, select

Certify.

7-46 RS/6000 Enterprise Server Model H Series User's Guide

1 2 ... 201 202 203 204 205 206 207 208 209 210 211 ... 289 290

Sin comentarios

IBM RS/6000 Manual de usuario Pagina 206