IBM H80 Manual de usuario descargar pdf (Pagina 189)

Appendix C. Service Processor Setup and Test

For your convenience, an example of a basic Service Processor setup checklist is

included here. Your setup may include more or fewer of the available features, so

you can adjust this checklist for your own application so that it is helpful to you.

Service Processor Setup Checklist

1. Unplug the power cord from the server.

2. Attach a local terminal for this setup procedure.

3. Plug in the server and power on the local terminal.

Attention: Make sure that server power remains off.

4. Bring up the Service Processor menus. See Chapter 3, “Using the Service

Processor” on page 25.

5. Set the system name. See “Privileged User Menus” on page 31.

6. Enable Surveillance. See page 33, and “Service Processor Functions” on

page 61.

7. Configure Call-In/Call-Out. See “Call-In/Call-Out Setup Menu” on page 53.

8. Exit the Service Processor menus.

9. Unplug the power cord from the server.

10. Attach modems (if needed). See page 27.

11. Plug in the server.

Attention: Make sure that server power remains off.

12. Test both of the following:

Call-In, page 174

Call-Out, page 175

Your Service Processor is now ready for use.

Appendix C. Service Processor Setup and Test 173

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 229 230

Sin comentarios

IBM H80 Manual de usuario Pagina 189