Ibm X.25 Manual de usuario Pagina 1

IBM IBM ARTIC X.25 Interface Co-ProcessorPCI Adapter Guide to Operations

Removal and Replacement Procedures ... 4-17Co-Processor Adapter Removal ... 4-18Co-Processor Adapter Replacement ...

About This BookThis manual contains the following information for the IBM ARTICX.25 Interface Co-Processor PCI adapter (referred to as the PCIco-pr

x X.25 Co-Processor PCI GTO

Chapter 1. Product DescriptionThe IBM ARTIC X.25 Interface Co-Processor PCI adapter (calledPCI co-processor adapter throughout this book), with su

SpecificationsSizeLength: 181 mm (7.125 inches)Width: 17.5 mm (0.7 inches)Height: 127 mm (5.0 inches)Weight: 0.15 kg (0.33 lbs)Environment  Air

Adapter Cable OptionsThe following adapter cables are available as options: X.21 Cable (FRU Part Number 16F1865)The X.21 cable is 3 meters (9.9 fe

1-4 X.25 Co-Processor PCI GTO

Chapter 2. InstallationThis chapter lists the hardware and software/microcode requirementsand provides information for setting up and installing t

Handling Static-Sensitive DevicesComponents for your PCI co-processor adapter can be damaged bystatic discharges. To prevent this damage, your PCI

Step 1: Install the PCI Co-Processor Adapter in theSystem UnitUse the following steps as general information for installing your PCIco-processor ad

11. Install the adapter by holding it by the top and firmly pressing itinto the expansion slot. 12. Align the slot in the card-retaining bracket w

Step 2. Download the Diagnostics and OperatingSystem Support ProgramsDiagnostics and support programs for various operating systems areavailable wi

3. Choose the Transfer Protocol supported by yourcommunications software.4. View online or download the Readme/Instruction file.5. Follow the inst

 IBM Realtime Control Microcode (ICAAIM.COM)ICAAIM.COM is the RAM-resident control program for the PCIco-processor adapter and is supplied with th

Step 4: Connect the Optional Adapter CableUse the following steps to connect your adapter cable.Note: The optional adapter cables are described o

Chapter 3. Connector Information Pin NumbersThe 37-pin, D-shell, male connector on the PCI co-processor adapteris shown below.1201937The 15-pin, D

Pin AssignmentsX.21 Connector InformationThe X.21 pin assignments for the 37-pin connector on the PCIco-processor adapter and the corresponding p

X.21 bis (V.24) Connector InformationThe X.21 bis (V.24) pin assignments for the 37-pin connector on thePCI co-processor adapter and the correspond

X.21 bis (V.35) Connector InformationThe X.21 bis (V.35) pin assignments for the 37-pin connector on thePCI co-processor adapter and the correspon

Chapter 4. Problem DeterminationProceduresThis chapter contains step-by-step instructions that can help youdetermine if your PCI co-processor adap

IBM ARTIC X.25 Interface Co-ProcessorPCI Adapter Guide to OperationsIBM

System Unit DiagnosticsFor details on performing the system unit diagnostics, see “ProblemDetermination Procedures” in the operating instructions

PCI Co-Processor Adapter Diagnostics TestNotes:1. You can test the PCI co-processor adapter with or without the37-pin wrap plug (shown in “Service

1. Set the Power switch on the system unit to Off.2. Insert your copy of the IBM Realtime Interface Co-Processor:Advanced Diagnostics diskette int

Blank Screen, Blinking Cursor, or Non-DecipherableDataIf your screen is completely blank or has a blinking cursor ornon-decipherable data, do the f

à ðIBM REALTIME INTERFACE CO-PROCESSORAND X.25 INTERFACE CO-PROCESSOR _____________________________________________________| | | | | | |PRESEN

A screen similar to the following may appear.à ð _______________________________________________________________IBM REALTIME INTERFACE CO-PROCESSOR

à ðIBM REALTIME INTERFACE CO-PROCESSORAND X.25 INTERFACE CO-PROCESSOR _____________________________________________________| | | | | | |PRESEN

à ðIBM REALTIME INTERFACE CO-PROCESSORAND X.25 INTERFACE CO-PROCESSOR _____________________________________________________| | | | | | |PRESENT

If the switches are set correctly but the configuration shown on yourdisplay is wrong, replace the co-processor adapter associated withthe incorre

DO YOU WANT TO TEST A CO-PROCESSOR ADAPTER SHOWNAS PRESENT ON THE DISPLAYED SCREEN?Note: A co-processor adapter is present if a “Y” appears in the

Important Before using this information and the product it supports, be sure to read all theinformation in Appendix B, “Notices.”Before installi

FRU and Error Code TableUse the information in the following table to identify the failing FRU(field replaceable unit). Part numbers for FRUs are

Interface TestA screen similar to the following is displayed for the interface test.à ðIBM REALTIME INTERFACE CO-PROCESSORAND X.25 INTERFACE CO-PR

DO YOU WANT TO TEST AN INTERFACE (V.24, V.35, OR X.21)?Note: You can test the PCI co-processor adapter with or without the37-pin wrap plug (shown

à ðIBM REALTIME INTERFACE CO-PROCESSORAND X.25 INTERFACE CO-PROCESSOR _____________________________________________________| | | | | | |PRESENT

à ðIBM REALTIME INTERFACE CO-PROCESSORAND X.25 INTERFACE CO-PROCESSOR _____________________________________________________| | | | | | |PRESEN

3. Insert your copy of the IBM Realtime Interface Co-Processor:Advanced Diagnostic diskette into the diskette drive, if previouslyremoved.4. When t

Co-Processor Adapter RemovalNote: The following steps are an example of co-processor adapterremoval. For specific adapter removal instructions, c

8. Remove the co-processor adapter mounting screw. Problem Determination Procedures 4-19

9. Grasp the co-processor adapter by the top corners and liftstraight up.Co-Processor Adapter ReplacementNote: The following steps are an example

3. Press down firmly on the co-processor adapter to seat theconnector. 4. Install the co-processor adapter’s mounting screw.5. Install the system u

Statement of Limited WarrantyThe warranties provided by IBM in this Statement of Limited Warranty apply only toMachines you originally purchase for

Service PartsAssembly 1: PCI Co-Processor Adapter12 Asm– Part Index Number Units Description1–1 55H4513 1 PCI co-processor adapter with memory–

Assembly 2: Cables and Wrap Plugs Asm– Part Index Number Units Description2–1 16F1887 1 Cable Option X.21 (P/N 07F3151)–1 16F1888 1 Cable Option

4-24 X.25 Co-Processor PCI GTO

Appendix A. Special ConfigurationInformation Note: This appendix contains special configuration information for DOSand OS/2. If you are using ano

Adding an ICAPARM.PRM File Entry for the PCICo-Processor AdapterThe only time you need to add an entry to the ICAPARM.PRM file forthe PCI co-proce

Example 1 — for One Co-Processor AdapterThe following example shows an ICAPARM.PRM file that can beused if you have one co-processor adapter instal

9 and 10 System Unit Address to call an adapter reset. Use thevalues shown: 0Fh, E010h. (Not supported on the PCIco-processor adapter.)11 End-Reco

Changing Your CONFIG.SYS FileIf OS/2 and Communications Manager/2 (CM/2) are being used, oneline of the CONFIG.SYS file must be modified (using a t

A-6 X.25 Co-Processor PCI GTO

Appendix B. NoticesReferences in this publication to IBM products, programs, or servicesdo not imply that IBM intends to make these available in a

If you transfer a Machine to another user, warranty service is available to that user forthe remainder of the warranty period. You should give you

Safety InformationTurn Everything OFF.Attach signal cables toreceptacles.First, remove power cord fromoutlet.To DisconnectNote: In the UK, by law

Notice to United Kingdom UsersThe United Kingdom Telecommunications Act 1984This apparatus is approved under General Approval number NS/G/1234/J/1

Required Electronic Emission and ConnectivityNoticesClass A Federal Communications CommissionStatementFederal Communications Commission (FCC)State

Industry Canada Compliance StatementThis Class A digital apparatus meets the requirements of theCanadian Interference-Causing Equipment Regulations

Informationen in Hinsicht EMVG Paragraph 3, Abs. 2: Das Gerät erfüllt die Schutzanforderungen nach EN 50082-1 und EN 55022 Klasse A.EN 55022 Klass

JapanThis equipment is in the 1st Class category (information equipmentto be used in commercial and/or industrial areas) and conforms tothe standa

Microcode Notice to CustomersMicrocode supplied by IBM for the ARTIC X.25 InterfaceCo-Processor PCI (PCI co-processor adapter) is protected bycopy

Readers' Comments — We'd Like to Hearfrom You IBM ARTIC X.25 Interface Co-ProcessorPCI Adapter Guide to OperationsPart Number 77H4686Overa

NO POSTAGENECESSARYIF MAILED IN THEUNITED STATESBUSINESS REPLY MAILFIRST-CLASS MAIL PERMIT NO. 40 ARMONK, NEW YORKPOSTAGE WILL BE PAID BY ADDRESSEEInt

THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS AND YOUMAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTIONTO JURISDICTION. SOME JURISDICTIONS D

IBMPart Number: 77H4686Printed in U.S.A.77H4686

vi X.25 Co-Processor PCI GTO

ContentsAbout This Book ....... ixRelated Publications . . . . . . . . . . . . . . . . . . . . . . . . . . ixChapter 1. Produ