Ibm X.25 Manual de usuario descargar pdf (Pagina 35)

A screen similar to the following may appear.

à ð

_______________________________________________________________

IBM REALTIME INTERFACE CO-PROCESSOR

AND X.25 INTERFACE CO-PROCESSOR

CARD ADDR = 2A

WERE YOU DIRECTED HERE FROM THE PROBLEM ISOLATION CHARTS

BECAUSE THE YELLOW LIGHT WAS BLINKING

(Y/N)?

_______________________________________________________________

DOES YOUR SCREEN LOOK SIMILAR TO THIS ONE?

NO Continue to the next page.

YES Replace the co-processor adapter.

Configuration Screen

Configuration information for all installed co-processor adapters

should appear on the screen. If a screen with an error message

appears, follow the instructions on the screen.

Notes:

1. The Realtime Interface Co-Processor Advanced Diagnostics are

configured to test up to a maximum of four co-processor

adapters (including the PCI co-processor adapter) at a time. If

you have more than four adapters, ensure that only four at a

time are installed.

2. The following screen is only a representation of the configuration

screen that should be displayed. Your screen may differ,

depending on your co-processor adapter configuration.

Problem Determination Procedures 4-7

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 69 70

Sin comentarios

Ibm X.25 Manual de usuario Pagina 35