Ibm 48X Manual de usuario descargar pdf (Pagina 15)

one pair of pins corresponding to the setting you chose in Step 3.

v If you are configuring the drive as master, set the jumper to the master 1

device setting. (This is how the drive is set when it is shipped.) If there is a

second device on the IDE port, check that the device is configured as slave.

v If you are configuring the drive as slave, set the jumper to the slave 2device

setting. Check that the other device on the IDE port is configured as master (or

master-with-slave-present).

v If you are configuring the drive as cable-select, set the jumper to the cable-select

3 device setting. If there is another device on the IDE port, check that the

device is also configured for cable-select.

Step 5. Mounting the drive in the bay

Attention: Be sure to use the mounting screws in the option package when you

are driving screws directly into the drive. Using screws that are too long might

damage the drive.

You can mount the CD-RW drive in the computer either horizontally or vertically.

If you mount the drive vertically, you must secure any CDs you place into the

drive before you close the drive tray, or the CD-RW drive will not be able to read

the CD properly. For further instructions on securing your CDs in a vertically

mounted drive, see “Loading a CD” on page 9.

1. Slide the drive into the bay. Your computer might have specific required

procedures for installing storage devices. Refer to the documentation that came

with your computer for further instructions.

2. Align the drive-bay screw holes with the threaded holes in the drive housing or

mounting bracket. Be sure to use the mounting screws provided with this

drive. Using the wrong size screws might damage the drive. Thread the screws

in loosely to check their position. Usually two screws are used on each side.

3. Check to ensure that the alignment is correct, and then tighten the screws to

secure the drive. Do not overtighten.

Installation and user’s guide 5

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 59 60

Sin comentarios

Models	Document Type
RECUMBENT RBK 800	User Manual Precor RECUMBENT RBK 800 User Manual, 100 pages
Commercial Cycles C846i	User Manual Precor Commercial Cycles C846i User Manual, 68 pages
C932	User Manual Precor C932 User Manual, 60 pages
S3.23	User Manual Precor S3.23 User Manual, 24 pages
Ellipticals EFX532i	User Manual Precor Ellipticals EFX532i User Manual, 96 pages
946l	User Manual Precor 946l User Manual, 101 pages
EFX5.21s	User Manual Precor EFX5.21s User Manual, 31 pages
EFX546i	User Manual Precor EFX546i User Manual, 114 pages
UBK 800-SERIES	User Manual Precor UBK 800-SERIES User Manual, 100 pages
ELLIPTICAL FITNESS CROSSTRAINERS EFX 835	User Manual Precor ELLIPTICAL FITNESS CROSSTRAINERS EFX 835 User Manual, 104 pages
UBK 815	User Manual Precor UBK 815 User Manual, 92 pages
LOW-IMPACT TREADMILLS 9.33	User Manual Precor LOW-IMPACT TREADMILLS 9.33 User Manual, 86 pages
UBK 800	User Manual Precor UBK 800 User Manual, 52 pages
EFX 5.21i	User Manual Precor EFX 5.21i User Manual, 58 pages
EFX 883	User Manual Precor EFX 883 User Manual, 104 pages
776i	User Manual Precor 776i User Manual, 112 pages
Commercial Stretch Trainer C240	User Manual Precor Commercial Stretch Trainer C240 User Manual, 16 pages
EFX 556i	User Manual Precor EFX 556i User Manual, 70 pages
C934	User Manual Precor C934 User Manual, 60 pages
EFX 5.25	User Manual Precor EFX 5.25 User Manual, 64 pages

Ibm 48X Manual de usuario Pagina 15