Ibm H SERIES RS/6000 Manual de usuario descargar pdf (Pagina 191)

The Identify Function

The identify function can be accessed from any of the service aids.

This function enables you to determine the location of a particular disk drive module

that you want to identify but do not want to remove from the system unit. The iden-

tify function causes the check light of the disk drive module to flash for identification

(1 second on, 1 second off), but has no effect on the normal operation of the disk

drive module. You can use the identify function on any number of disk drive

modules at the same time.

Instructions displayed by the service aids tell you when you can select the identify

function.

Note: You cannot use the identify function on a device that is in reserved status.

Starting the SSA Service Aids

To start the SSA service aids:

1. Start the system diagnostics (see the

Common Diagnostics Information Manual

and go to the DIAGNOSTIC OPERATING INSTRUCTIONS screen.

2. Follow the instructions to display the FUNCTION SELECTION menu.

3. Select the SERVICE AIDS options from the FUNCTION SELECTION menu.

4. Select SSA SERVICE AIDS from the Service Aids menu.

The SSA Service Aids menu displays.

┌────────────────────────────────────────────────────────────────────────────────┐

│ SSA SERVICE AIDS 8238 │

│ │

│ Move cursor onto selection, then press Enter. │

│ │

│ Set Service Mode │

│ Link Verification │

│ Configuration Verification │

│ Format Disk │

│ Certify Disk │

│ │

│ F3=Cancel F1=Exit │

│ │

└────────────────────────────────────────────────────────────────────────────────┘

Chapter 7. Using the Service Aids 7-31

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 289 290

Sin comentarios

Ibm H SERIES RS/6000 Manual de usuario Pagina 191