Ibm Aptiva 2142 Manual de usuario descargar pdf (Pagina 118)

Creating a Diagnostics Bootable Diskette

The Diagnostics and Utilities CD allows you to create a bootable advanced

diagnostics diskette. This permits the flexibility of loading the diagnostics

program from either the CD/DVD-ROM drive or the Diskette drive.

Note: Because of the expanded options of the Service Level A Diagnostics

CD, the preferred way of running the diagnostics is from the CD. Use the

diagnostics on the diskette if the CD/DVD-ROM unit is inoperable.

To create a bootable diagnostics diskette:

1. Install the Diagnostics and Utilities CD in the CD/DVD-ROM drive.

2. Power-off, then power-on the system unit.

3. Do not press F1 during POST.

4. When the Aptiva Diagnostics and Utilities Menu appears, depress the

zero key to select the DOS screen. The A: drive prompt will appear.

5. Select the CD drive (the CD drive default is G:).

6. Select the PCDR and IMAGE directories by typing: CD\PCDR\IMAGE

and press enter.

7. Install a blank 1.44 KB diskette in diskette drive A.

Note: The diskette does not need to be formatted.

8. Type: LOADDSKF DIAGDISK.DSK B: and press enter. (At this point,

the diskette drive is B:).

9. There will appear on the screen a statement that the diskette is about to

be overwritten. Make sure the diskette in drive A is the one you want to

use, then answer Y.

Attention

This procedure will overwrite all data on the diskette in drive A.

10. After the copy is finished, you will have a bootable advanced diagnostics

diskette.

To Load the Diagnostics Diskette:

Note: Before beginning, ensure that Suspend Timer is disabled in the

Setup Utility. This Service Level A Diagnostics will not support Low Level

format.

1. Power-off the system unit.

2. Install the diagnostics diskette in drive A.

3. Power-on the system unit.

4. Do not press F1 during POST.

3-4

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 211 212

Sin comentarios

Ibm Aptiva 2142 Manual de usuario Pagina 118