IBM SENG-3002-01 Manual de usuario descargar pdf (Pagina 12)

__ 2. Remove the blank filler cards from the next available positions by doing the

following:

__ a. Push outward on the latches A that are located at each end of the

filler card, Figure 5 on page 7.

__ b. Remove the filler card from the card socket and discard it.

__ 3. Find the package that contains the new memory cards.

__ 4. Attention: Memory cards are fragile. Handle with care.

Remove a memory card, one at a time, from the static protective package.

__ 5. Refer to Figure 5 on page 7 to install the memory card by doing the

following:

__ a. Look carefully at the notches on the bottom of the memory card. The

distance between the notches and the end of the memory card is

slightly different.

__ b. Align the card as shown in Figure 5 on page 7.

__ c. Match the keyed notches and push down on the card until the latches

close.

Figure 4. Memory Locations on Card Assembly

6 30xx Memory Card Installation V5R1

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 29 30

Sin comentarios

IBM SENG-3002-01 Manual de usuario Pagina 12