IBM C3 Manual de usuario Pagina 196

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 248
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 195
Page 188 Frequently Asked Questions
I tried to do a local
HotSync operation,
but it did not
complete
successfully.
Try each of these in turn:
Make sure HotSync Manager is
running. If HotSync Manager is
running, exit and restart it.
Make sure you selected Local from the
HotSync Manager menu or the Palm
Desktop for IBM WorkPad menu.
Check the cable connection between the
cradle and the serial port on your
computer.
Make sure you selected the correct
serial port on the Local tab in the Setup
dialog. It should be set to the port where
you connected the cradle.
Try a lower baud rate setting on the
Local tab in the Setup dialog.
Make sure you are not running another
program, such as America Online,
CompuServe, or WinFax, that uses the
serial port you selected in the Setup
dialog box.
Read the HotSync Log for the user
account for which you are performing a
HotSync operation.
Make sure your companion is seated in
the cradle correctly.
Make sure the gold-plated connectors
on the cradle and your companion are
clean. Use a pencil eraser to clean them.
Vista de pagina 195
1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 247 248

Comentarios a estos manuales

Sin comentarios