IBM N2800e Manual de usuario descargar pdf (Pagina 17)

Setting up the hardware

Unpacking your hardware

Unpack your hardware. Contact your reseller, or IBM, if

you do not have these standard parts:

1 Thin client logic unit

2 Base

3 Mouse

4 Keyboard

5 Power cable

Selecting the voltage for your location:

Attention: You may damage the thin client if you do

not select the correct voltage.

1. Locate the voltage switch A on the bottom of the

thin client.

2. Use a pen, or similar object, to slide the switch A to

the correct setting for your location (see ″Voltage

selection″ in Table 11 on page 42).

Installing options:

v If you have additional memory, or optional feature

cards, see “Appendix B. Hardware maintenance

procedures” on page 45 before continuing with the

following setup procedures.

v If you have a security cable and would like to restrict

access to the thin client logic unit, thread your cable

through hole B.

v For vertical placement of the thin client, see “Installing

the support base” on page 8.

v For horizontal placement of the hardware, continue

with “Connecting your hardware” on page 8.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 81 82

Sin comentarios

IBM N2800e Manual de usuario Pagina 17