IBM Fast Fabric Ficha de datos descargar pdf (Pagina 8)

QLogic 10Gb Virtual Fabric Adapter and CNA for IBM BladeCente

r

8

In BladeCenter H, the ports of QLogic 10Gb Virtual Fabric Adapters are routed through the midplane to

I/O bays 7 and 9 (Figure 2). The BladeCenter HT is similar in that the QLogic VFA card ports are also

routed through the midplane to I/O bays 7 and 9.

Figure 2. IBM BladeCenter H I/O topology showing the I/O paths from QLogic 10Gb VFA

The QLogic 10Gb Virtual Fabric Adapters require I/O modules to be installed in bays 7 and 9 of the

BladeCenter H or HT chassis (Table 5).

Table 5. Locations of I/O modules required to connect to the expansion card

Expansion card I/O bay 7 I/O bay 8 I/O bay 9 I/O bay 10

QLogic 10Gb Virtual Fabric Adapter Supported I/O

module

Not used Supported I/O

module

Not used

QLogic 10Gb Virtual Fabric CNA Supported I/O

module

Not used Supported I/O

module

Not used

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comentarios a estos manuales

Sin comentarios