Ibm B50 Manual de usuario descargar pdf (Pagina 146)

Handling Static–Sensitive Devices

Attention: Adapters, planars, diskette drives, and disk drives are sensitive to static

electricity discharge. These devices are wrapped in antistatic bags, as shown in this

illustration, to prevent this damage.

Take the following precautions:

 If you have an antistatic wrist strap available, use it while handling the device.

 Do not remove the device from the antistatic bag until you are ready to install the

device in the server.

 With the device still in its antistatic bag, touch it to a metal frame of the system.

 Grasp cards and boards by the edges. Hold drives by the frame. Avoid touching

the solder joints or pins.

 If you need to lay the device down while it is out of the antistatic bag, lay it on

the antistatic bag. Before picking it up again, touch the antistatic bag and the

metal frame of the server at the same time.

 Handle the devices carefully in order to prevent permanent damage.

7-2 7046 Model B50 Service Guide

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 197 198

Sin comentarios

Ibm B50 Manual de usuario Pagina 146