Ibm 802.11g Wireless Broadband Router WRT-410 Manual de usuario Pagina 24

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 69
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 23
- 19 -
NAT: Select the option to enable or disable NAT.
Transmit: Select the option to set the desired transmit parameters. Disabled, RIP 1 or RIP 2.
Receive: Select the option to set the desired transmit parameters. Disabled, RIP 1 or RIP 2.
3.4.3 Routing Table
This screen will show you the routing table of WRT-410. The routing table is a database created by the
WRT-410 that displays the network interconnection topology.
Network Address: Displays the network IP address of the connected node.
Network Mask: Displays the network (subnet) mask of the connected node.
Gateway Address: Displays the gateway address of the connected node.
Interface: Displays whether the node is connected via a WAN or LAN.
Metric: Displays the metric of the connected node.
Type: Displays whether the node has a static or dynamic IP address.
Vista de pagina 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 68 69

Comentarios a estos manuales

Sin comentarios